Keba Kemro FX 271/A, Руководство по проектированию устройства

Страница: 7 / 26

1 Introduction
1.1 Purpose of the document
This document describes the structure of the FX 271/x
(SERCOS III Master module).
Information
This manual is not addressed to end customers! Necessary safety notes for
the end customer have to be taken into the customer manual in the respective
national language by the machine builders and system providers.
1.2 Intended use
The FX 271/x was developed for control applications in industrial machines.
The typical applications areas include injection molding machines, robots,
presses, machine tools and similar.
The FX 271/x may only be used for the types of use described in the technical
descriptions and in compliance with described technical general conditions.
The FX 271/x may only be used in conjunction with recommended/approved
third-party equipment/installations.
The FX 271/x has been developed, manufactured, tested and documented in
accordance with the appropriate guidelines and standards. Therefore, the
products do not pose any danger to the health of persons or a risk of damage
to other property or equipment under normal circumstances, provided that the
instructions and safety precautions are properly observed.
1.3 Preconditions
This document contains information for persons with the following skills:
FX 271/A, FX 271/B Introduction
© KEBA 2015
Project engineering manual V1.07 7