Keba KeMes A1 Series, Краткое описание

Страница: 5 / 12

Positioning
Since the measurement principle of KeMes is based on the reflection of a laser
beam, attention must be paid to the correct positioning of the device. Measurement
is not possible on bent workpieces or in the bending radius.
Information
For an exact measurement, a minimum distance of 20 mm between the device and
the surface of the workpiece is required.
Fig. 1-1: Examples of positioning using the measuring aid
Fig. 1-2: Examples of positioning using the upper tool
Manual measurement
1) Attach the measuring aid to the device.
2) Switch the device on by pressing the operating button.
3) Navigate to the
Manual
menu item by pressing and holding the operating button.
4) Place the device close to the workpiece so that the measuring aid touches the
bending edge.
5) Start the measurement (switch on the laser) by pressing the operating button
once.
6) Position the device so that the laser beam can hit both legs of the workpiece at
an angle of 90° without being obstructed.
7) Hold the device still until the measurement is complete and the laser switches
off automatically.
Settings on the press brake
● Adjust the decompression path. For a correct measurement result, the press
beam must be moved up far enough and the legs of the workpiece must be un-
stressed. For more information, see the Downloads area of the KEBA website.