3 | Product description
KEB Automation KG
14
ma_dr_f6-cu-a-inst-20118593_en
3.6 Control terminal strip X2A
The control terminal strip X2A is a 28-pole pluggable, double-row terminal strip with
spring-cage connection. It contains:
• 8 digital inputs
• 2 digital outputs
• 1 Relay output
• 2 analog inputs (plus 1 switchable analog input)
• 1 analog output
• CAN bus interface
• 24V input and output
3.7 Safety terminal block X2B
The design of the terminal strip X2B depends on the safety module. The description is
given in a separate manual for the safety module.
3.8 Encoder interfaces X3A, X3B
Der COMBIVERT contains two universal encoder interfaces. The interfaces can be adap-
ted independently to different encoders.
3.9 Diagnostic interface X4A
The integrated RS232/485 interface serves for the connection of service tools (e.g. COM-
BIVIS) displays or the F6 operator. Telegram DIN 66019II is used as communication pro-
tocol.
3.10 Realtime-Ethernet module
The Real-time Ethernet module contains more realtime fieldbus interfaces. The assign-
ment of the fieldbus interfaces, the protocol and the function of the "NET ST" LED de-
pends on the set protocol. The description is given in the Realtime Ethernet module's own
manual.
3.11 Status LEDs
3.11.1 Boot display
Before the LEDs start their normal function, they signal the boot procedure after switching
on:
LEDs
Status
Note
VCC
NET
DEV
OPT
ST
ST
off
Device off
VCC
NET
DEV
OPT
ST
ST
Initialization
Control is supplied with 24 V
VCC
NET
DEV
OPT
ST
ST
FPGA booted
FPGA has been booted error-free (approx. 6 s)
