KEB COMBINORM B Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 50

KEB COMBINORM B Скачать руководство пользователя страница 13

13

BASIc SAfETY INSTrUcTIONS

1.6 Maintenance

►

Secure the brake against being switched on accidentally during maintenance work.

►

Make the brake load-free during maintenance work to avoid uncontrolled move-

ments.

►

Protection against the ingress of foreign particles into the air gap. These particles

may impede the movement of the armature.

►

When carrying out maintenance and repair work, the brake must not be energised.

►

The brake lining must not come into contact with cleaning agents or solvents.

In case of malfunction, unusual noises or smells inform a person in charge!

DANGEr

Unauthorized exchange, repair and modifications!

Unpredictable malfunctions!

► The brake must not be converted, modified or misused.

►

Only use original manufacturer parts.

►

Infringement will annul the liability for resulting consequences.

cAUTION

High temperatures due to braking
Burning of the skin !

►

Cover hot surfaces safe-to-touch.

►

If necessary, attach warning signs on the system.

►

Check temperature and allow coupling to cool down if necessary.

cAUTION

rotating Parts
Shock or crushing of body parts !

►

Wear protective goggles against ejected parts and dirt particles,

especially during first start-up.

►

Take measures against being pulled into the machine.

«
...
11
12
13
14
15
...
»

Содержание COMBINORM B



















































Отзывы:

Нет отзывов