manualshive.com logo in svg

KEB COMBINORM B, Инструкция по эксплуатации, Страница: 12 / 50

Поделиться
Скачать
KEB COMBINORM B Скачать руководство пользователя страница 12

12

 BASIc SAfETY INSTrUcTIONS

1.5  Start-up and operation

The operation must not be started until it is determined that the installation complies with 

the machine directive; Account is to be taken of 

EN 60204-1

.

 cAUTION

Pay attention to friction work (speed and the frequency of opera-

tion) !
Loss or drop of the braking torque !

 

► Exceeding the technical specifications may result in thermal over

-

load at the braking surface or magnet. This may lead to failure of 

the brake.

1.3  Installation and mounting

NOTICE

Squeezing and pinching of fingers by self-rotation.

 

►

Before installation, make sure that the drive is load-free.

 

►

Secure drive against rotation.

Consider the following installation measures to prevent faults

 

►

Do not operate the brake in an explosive environment. 

 

►

 Provide measures against freezing or ice formation on the friction surfaces.

 

►

 Take appropriate measures against high air humidity, aggressive vapours/liquids or 

similar that lead to corrosion and 'rusting' of the pole surfaces.

1.4  Electrical connection

 DANGEr

Electrical voltage at brake and motor !
Danger to life due to electric shock !

 

►

Any work on the electrical power supply may only be carried out by 

a qualified electrician.

 

► When carrying out any work on the coupling, switch off the supply 

voltage to the motor and secure it against switching on.

 

►

Never bridge upstream protective devices, not even for test purpos-

es.

 

►

Standard-compliant testing of the protective conductor connection to 

all touchable metal parts.

Содержание COMBINORM B



















































Отзывы:

Нет отзывов