GB -4
Introduction
1.
Introduction
1.1
General
Prior to performing any work on the unit the user must familiarize himself with the unit. This
includes especially the knowledge and observance of the
safety and warning directions
.
The pictographs used in this instruction manual have following meaning:
Danger
Refers to danger of life by electric current.
Warning
Refers to possible danger of injury or life.
Note
Refers to tips and additional information.
1.2
Validity
This manual as well as the specified hardware and software are developments of the Karl E.
Brinkmann GmbH. Errors and omissions excepted!The company Karl E. Brinkmann GmbH
established this documentation to the best of her knowledge but without engagement, that
the herein stated specifications may not provide the user with the expected advantagesThe
Karl E. Brinkmann GmbH reserves the right to change specifications without prior notice or
to instruct third persons.
The information contained in the technical documentation, as well as any user-specific advice
in spoken and written and through tests, are made to best of our knowledge and information
about the application. However, they are considered for information only without responsibil-
ity. This also applies to any violation of industrial property rights of a third-party.
Inspection of our units in view of their suitability for the intended use must be done generally
by the user. Inspections are particularly necessary, if changes are executed, which serve for
the further development or adaption of our products to the applications (hardware, software
or download lists). Inspections must be repeated completely, even if only parts of hardware,
software or download lists are modified.
Controlling by the
user
Application and use of our units in the target products is
outside of our control and therefore lies exclusively in the
area of responsibility of the user.
