|
keatingofchicago.com
4
OPERATING THE CONTROLLER
STARTING A COOK CYCLE
To start a cook cycle, simply press the product key for the product you wish to cook. If the product
key is programmed, the correct cooking time will be displayed (example) and this time
will immediately start to count down in minutes and seconds. The pressure solenoid will also close if
programmed to do so. If is displayed immediately and the unit starts to signal, the key
being operated is not programmed. If correctly programmed, it will count down to
followed by and start to signal.
Cancel this signal by pressing the same cycle product key used to start the cook cycle.
ACTION ALARMS
If the unit is programmed with action alarms, the action alarms will signal at a preset time during the cooking
cycle; for example, . This signal, a dual rhythm beeping, will last 5 seconds and then self-cancel. The
display will fl ash the action alarm time and the unit will then start counting toward .
HOLDING TIMERS
If the unit is programmed with holding times, they will automatically start counting upon expiration
of the cooking cycle. When there are active hold times, the HOLD indicator will be lit. To view all
active hold times, press and hold the HOLD key. Upon expiration, the timer will display
and pulse with an audible tone.
To cancel, press the HOLD key.
To view the hold time with the least amount of time remaining, press the HOLD key.
Содержание Silver Edition 8
Страница 16: ......