Q.2.43 April 2018
Page 3
KE2 Compressor
Sequencer
Quick Start Guide
© Copyright 2018 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Setup the controller by going to the
Setpoints page.
❶
After the controller is wired, the KE2 Compressor Sequencer is setup using the
controller’s onboard webpage. To access the webpage on the controller you will
need a laptop and Ethernet cable, or a mobile device and either the KE2 LDA com-
munication device, or the KE2 WiFi Service Tool.
Power Up & Enter Setpoints
therm
solutions
ENTER
BACK
Compressor
Sequencer
®
Controller
wired and ready
Ethernet Cable
Computer
therm
solutions
ENTER
BACK
Compressor
Sequencer
®
Superheat
0.0 F
Suct Pressure
96.2 F
Suct Temp
87.7 F
Superheat
0.0 F
Suct Pressure
96.2 F
Suct Temp
87.7 F
Controller
wired and ready
Ethernet Cable
Computer, Tablet or Smart Phone
therm
solutions
PWR
WIFI
LAN
WAN
3G/4G
Ethernet Cable
therm
solutions
ENTER
BACK
Compressor
Sequencer
®
Controller
wired and ready
Superheat
0.0 F
Suct Pressure
96.2 F
Suct Temp
87.7 F
Computer, Tablet or Smart Phone
Option A
Option B
Option C
NOTE: Computer requires Static IP.
See bulletin Q.5.11
❸
This will take you to the controller’s Home Page. From the Home Page select the
Setpoints tab.
❷
Enter the controller’s IP address, into your web browser’s address bar. The IP ad-
dress is found on a sticker on the controller.
Specifications
Controller
Input Voltage:
100VAC - 240VAC
Ambient Temp:
-40°F to 140°F (-40°C to 60°C)
Operating Temp:
-40°F to 140°F (-40°C to 60°C)
Inputs:
(3) temperature sensor
(3) digital input
(2) pressure sensor inputs
Relays:
(4)10A inductive fan contactor
pilot
Digital Input
No function, Compressor Module,
Oil Safety Switch, High Pressure
Switch, System Off, 2nd Pressure
Set Point
Communication:
Standard TCP/IP
Pressure Transducer - pn 20201 (10 ft lead)
Pressure Range:
0 to 150 psig
Proof Pressure:
450 psi
Burst Pressure:
1500psi
Operating Temp:
-40°F to 275°F (-40°C to 135°C)
Pressure Transducer - pn 20202 (10 ft lead)
Pressure Range:
0 to 500 psig
Proof Pressure:
1000 psi
Burst Pressure:
2500 psi
Operating Temp:
-40°F to 275°F (-40°C to 135°C)
