manualshive.com logo in svg

KE LOGEM LGH 28.8D1, Руководство по эксплуатации, Страница: 117 / 200

Поделиться
Скачать
KE LOGEM LGH 28.8D1 Скачать руководство пользователя страница 117

117

 Operation Manual V.34 - Modems, Version 07/97

REG

Chapter 4

S63

Dial Backup Reswitching

The register defines the duration period that is necessary for faultless
V.21 data transmission on the leased line before the modem switches
back from switched line to leased line operation.

register

values / default

description

S63

6...255 / 6

dial backup reswitching

(unit: 10 secs.)

This register value has to be set identically at both modems!

S65

Reswitching/Hour

The register defines the max. number of reswitching attempts per hour.
The modem does not attempt further reswitchings when the max. number
of attempts is reached. The register is designed to avoid permanent
switchings at errored lines.

register

values / default

description

S65

1...255 /   4

reswitching/hour

S66

Reswitching/Day

The register defines the max. number of reswitching attempts per day.
The modem does not attempt further reswitchings when the max. number
of attempts per day is reached.

register

values / default

description

S66

1...255 / 16

reswitching/day

Attention!

The features described on this side are only valid for
dial backup operation. They are not applicable for the
top rail version LGH 28.8D1.

Register Description

Содержание LOGEM LGH 28.8D1









































































































































































































Отзывы:

Нет отзывов