8
ATTENTION
In case “U” hook is being used, installation method is the same.
“U” hook
Check Point After Installation
1. The Blade Screws (6 pieces) for securing the Blade Assembly are tightly screwed.
2. Blade Safety Hanger must fi x at the position on Blade.
Check
CAUTION
Blade must be fi xed correctly.
Can cause no air fl ow.
Can cause injury if blades drop.
Tighten the Blade Screws fi rmly using a
screwdriver.
Can cause injury if Blade drops.
Do not remove Blade Safety Hanger from Blade.
Can cause injury if Blade drops.
Ceiling Hook
(“J” Hook)
Pulley
C Hook
Pulley
1st step
Take out Pulley Set from Parts Set,
after that cross it to Pipe.
2nd step
Place Pulley onto Ceiling Hook.
ALTERNATIVE METHOD
1st step
Place the Pulley Set to the Ceiling Hook
as shown in the picture.
2nd step
Incline Pulley Set and install Ceiling Fan.
Make sure the Fan maintain straight to avoid the Blade from
touching the ceiling during installation.
Ceiling Hook
(“J” Hook)
Alligned Parallel
Pipe Hole
C Hook
WARNING
Ensure Ceiling Hook can afford more than 10 times the Ceiling
Fan weight.
Can cause injury if Blades drops.
CAUTION
Ensure Ceiling Fan is not tilted so that the Blade does not touch the ceiling during installation.
Can cause unstable air fl ow and effect the Ceiling Fan to wobble.
D)
Installation to Ceiling
1
1
Install to Ceiling.
