2
Safety Precautions
To avoid the possibility of causing injury to users or damage to properties, please follow all the explanations written below.
WARNING
A state that may be caused by the mishandling of products, which, if not avoided, may lead to the
possibility of death or serious injury of users.
CAUTION
A state that may be caused by the mishandling of products, which, if not avoided, may result in the injury
of users or property damage.
This symbol denotes an action that is COMPULSORY.
This symbol denotes an action that is PROHIBITED.
WARNING
Follow strictly to all the instructions given in this manual for installation.
Electrical wiring must be done by competent personnel.
Installation must be done by a qualifi ed personnel.
Installation error can cause fi re, electrical shock, Ceiling Fan drops and injuries.
Stop using the Ceiling Fan when any abnormality or failure occurs and turn “OFF” the Miniature Circuit Breaker (MCB).
(Risk of smoke, fi re, electric shock and drop)
Switch off power supply and wait until
the Blade is fully static, before cleaning
or doing any maintenance jobs.
Can cause Ceiling Fan to move
suddenly, injuries and electrical shock.
Kindly refer to your sales agent for
repairing or maintenance issue.
Do not dismantle the Ceiling Fan unless
stated by this manual.
Must use only supplied parts.
Can cause fi re, electrical shock, Ceiling
Fan drops and injuries.
Avoid damage wire during installation
eg. Deform due to heat, twist, bend, etc.
Can cause fi re, explosion, short circuit
and electrical shock.
Ensure the Pipe has been fully tighten
to Motor Shaft. (Bolt tightening torque
is 800~1200 N•cm) and Cotter Pin
must fi x into Bolt and bent.
Can cause injury if Ceiling Fan drops.
Ensure Ceiling Hook can afford more
than 10 times the Ceiling Fan weight.
Can cause injury if Ceiling Fan drops.
Do not sprinkle water to Ceiling Fan. Or,
do not wet Ceiling Fan.
Can cause fi re, explosion, short circuit
and electrical shock.
Tighten the Blade Screws fi rmly using
a screwdriver.
Can cause injury if Blade drops.
Do not use power supply other than
rated voltage mentioned.
Overheating can cause electrical shock
and fi re.
Do not install near a fl ammable area
such as a gas cooker.
Can cause fi re, explosion, short circuit
and electrical shock.
