14
Fix the Speed Regulator box to the wall by screwing the screws as shown.
如圖所示鎖緊螺絲以安裝調速器箱至牆壁。
4
4
L
1
Wood Screw /
木螺絲
Holes /
孔
Wall Plug /
壁式插座
L
2 3
N 1
Insert the Power Cord (from the power supply) and the Lead Wire (from Motor Assembly) through the hole of the Speed
Regulator Base as shown.
如圖所示將電纜(自電源)及電線(自發動機組件)通過調速器底部的孔插入。
3
3
2
3
N
L
1
Switch /
開關
Power Cord (from power supply)
電纜(自電源)
Lead Wire (from Motor Assembly) /
電線(自發動機組件)
1
2 3
N
L
Loosen the screw from the Speed Regulator Cover. Open the Speed Regulator by lifting up the Speed Regulator
Cover from the base.
鬆開調速器蓋子上的螺絲。從底部提起調速器蓋子以打開調速器。
2
2
2 3
L
1
N
Speed Regulator Base /
調速器基地
Terminal 2 /
端子 2
Terminal 1 /
端子 1
Screw /
螺絲
Regulator Cover/
調節器蓋子
Wood Screw and Wall Plug is not supplied.
木螺絲和壁式插座並不提供 。
ATTENTION /
留意
留意
M48SG_EN_CT.indd 14
M48SG_EN_CT.indd 14
1/5/2011 8:07:50 PM
1/5/2011 8:07:50 PM