What to do if...
●
Is cold, moist air getting into the room?
→
Avoid opening and closing the doors/windows very often.
●
Is it an item which is difficult to dry and need to be squeezed
dry by hands?
●
Are you using a heater near the unit?
→
If the temperature near the sensor is high, it will not be able to
accurately judge the drying time.
●
Does the air flows through all of the clothes?
Also, are the clothes packed close together or piled up?
→
For clothes that are difficult to get dry, try running the dryer in
"
Auto stop
"
mode or
"
Hi (Cont.)
".
●
Depending on the amount and type of clothes, they could be difficult to
get dry.
A
Hole
Hole
Louver
Pin
Pin
Flap
Louver
Pin on the unit
Hole
Dry
clothes
function
Takes long time to
dry clothes in
"
Auto stop
"
mode
Does not dry
clothes completely
even after "Auto stop"
mode is finished.
(
)
●
Try using "Normal" or "Lo (Silent)" mode under "Dehumid."
(
page 13)
→
Drying time is longer than " Dry Clothes".
Operate with loud
noise
The unit has been
knocked over
The louver / louver
flap is detached
Operation stops automatically and Alert indicator lights up.
1. Disconnect the power plug and set the unit back upright. (Wipe away
any spilled water.)
2. Let the unit stand for half a day or more without using it (To dry the unit
completely in case any water has spilled inside)
3. Insert the power plug again and restart the unit.
●
Install the louver by
attaching the pin into the
slot as shown in
○
A .
●
I
nstall the flap by
attaching 2 pins to the
equivalent holes on the
louver.
How to use
19
GZJ90H