Operating the dehumidifier
Note
●
"Auto" mode will automatically switch the heater on and off in order to maintain a humidity of
55%. (If humidity is less than 55%, operation will stop.)
●
When you press a button to turn the power on or off or switch the operating
mode, the unit will make a clicking sound. However, this is not a malfunction.
●
If no buttons are pressed for 24 hours, operation will stop automatically to prevent
if you forget to turn off the unit.
●
When the unit starts in
"
Lo
"
speed mode, the fan will blow at a medium level for the first two
seconds.
●
●
Be sure to wait for 2 minutes before unplugging the power cord. (The fan will operate for
about 2 more minutes after the unit is turned off for cooling down the heater.)
Do not place objects on top of the unit. (They may cause operating malfunctions or other
problems.) In particular, do not place magnets or metallic objects on the unit.
If the unit tips over, the built-in magnet for automatically stopping operation will operate,
the indicators will illuminate and operation will stop. (
page 25)
Important
Dehumidify
button
Operation indicator
Dry Clothes
button
Air Outlet
Louver
Power Plug
imer button
Air Swing button
Louver Direction button
( page 16)
Power Off/On button
●
When this button is pressed, the louver
will completely open and the unit starts
operate. (The Operation indicator and
Humidity indicator will light up.
page 5)
●
If press again, the unit will turn off.
(All indicators will turn off.)
( page 18)
T
12