Maintenance
①
Turn off the unit (press the POWER Off/On button).
②
Pull out the power plug.
③
Drain the tank
(
page 21)
Filter
(Once every 2 weeks)
Remove dirt and dust on the filter using a
vacuum cleaner with a fine tipped nozzle.
●
Before removing the filter, use vacuum cleaner to remove dust
from the air inlet area.
●
The filter is light brown-colored even before used. This is
normal, not dirt.
(
page 10)
●
If the filter is clogged, dehumidifying power will decrease. This
will waste electricity or even cause the unit to be malfunctioned.
Main unit
(Once a month)
Use a soft cloth or a mild kitchen
cleanser with warm water to
wipe any dirt on the unit.And then dry
the body with dry cloth.
●
The air intake and outlet get dirty easily.
You may clean the dust and dirt by using a vacuum
cleaner.
Important:
●
Do not lay down the unit.
(Doing so will cause water leakage.)
●
Do not splash water directly onto the main unit.
(Doing so may deteriorate the insulation and cause the
unit to rust or cause electrical shock.)
●
Do not use any substances shown at right hand side to
clean the unit.
(Doing so may result in warping or discoloration of the
unit.)
●
If you use chemically treated clothes, be sure to follow
their instructions provided.
Intake
Outlet
Filter
Knob
Pin
Slot
Alkaline detergent
Kerosene
Alcohol
Thinner
■
Remove the filter
①
Push the knob.
②
Pull the filter out
towards yourself.
●
Attach two pins on filter into the slots on the unit, and
then insert the filter.
■
Reinstall the filter
Knob
22
