Installation cautions
■
Do not install the product as the
method which is not approved in the
installation and operating instructions.
Otherwise, the product any fall
down and it may cause injury.
■
It's prohibited to install the product in
locations such as machinery, chemical
plants or research facilities where it
will be exposed to noxious gases
containing acids, alkali, organic
solvents, paint fumes, etc., to gases
containing corrosive ingredients.
It could cause gas poisoning,
corrosion and degradation of
product that results in a fire.
■
The product must be installed tightly.
Components must be installed tightly.
Otherwise, it may injury person
caused by product's falling off.
■
It’s prohibited to install in the following locations.
Indoor Outdoor
Do not install the product
where there is steam.
Location with combustible
gas or emission of exhaust
gas.
Do not install the product
out of the window and
wall.
Otherwise, it may cause
a short circuit, thus
resulting in a fire.
Otherwise, it may cause
a short circuit, thus
resulting in a fire.
Otherwise, the product
may get wet in the rain and
cause short circuit.
WARNING
■
The product must be mounted on a
building which is strong enough.To
ensure it can bear over 5 times of
product weight.The building must be
reinforced if its strength can not be
ensure.
Otherwise, the product
may fall down and it
may cause injury.
■
The special-purpose or dedicated
parts, such as mounting fixtures,
must be used if such parts are
provided.
Otherwise, the product may fall
down and it may cause injury.
■
Please wear the gloves when installing
the product.
Otherwise, it may
cause damage.
■
Product must be installed by 2
persons.
Otherwise, the product may fall
down and it may cause injury.
CAUTION
3
