
EZ
News
Flash
74
2
Select "はい"(Yes), press
+
[選択]
(Select), and press
+
[Select].
1
When the standby screen is
displayed, press
C
. Select the telop
and press
+
[OK].
The setting is complete.
After you complete the settings and return to
the standby screen, you will see a telop with
the message "Next bulletin coming soon. Please
wait." run across the standby screen.
Setting EZ News Flash
EZ News Flash can be used after performing a simple setting procedure
(free of charge).
Set EZ News Flash after performing "Initializing E-mail and EZweb"
(→Page 22).
● Perform the following steps to cancel the News Flash service.
When the standby screen is displayed,
→select the telop,
[OK]
→
[メニュー](Menu)→select "サービス設定解除"(Undo Service Settings),
[選択](Select)→select "YES",
[選択](Select)→select "解除する"(Undo),
[Select]→select "OK",
[Select]
● To change the News Flash update notification tone/vibrator settings or
the incoming call lamp settings, perform the following steps.
When the standby screen is displayed,
→
→
→
"NewsFlash
Rcv"→Set volume and time etc.
If you do not need notification of updates, set "Volume" and "Vibrator" to
"OFF".
Note