
Contents/Getting
Ready
12
You can also connect the common AC adaptor 01/02
(option) to the W62K directly to charge the battery
pack.
Open the cover of the external connection jack, and
after checking the shape of the connector insert it
straight into the terminal until it clicks.
Removing the connector
Remove the
common AC
adaptor 01/02
(option) by
pushing in on the
lock buttons on
both sides of the
connector and
pulling it straight
out of the desktop
holder.
Lock buttons
● You must purchase a common AC adaptor 01/02 (option) for charging.
Note that the configuration of the AC adaptor may be different from that
shown in the illustration.
Note
1
Check the shape of the connector for the common AC adaptor
01/02 (option), and insert it straight into terminal of the
desktop holder until it clicks.
3
2
1
2
Rotate and fold out the power plug for the common AC adaptor
01/02 (option), and plug it into a household 100V AC power outlet.
3
Insert the W62K into the desktop holder until it clicks. Charging
begins.
When charging is completed, remove the W62K from the desktop
holder, and remove the power plug from the power outlet.
The charging start signal sounds, and the incoming indicator
lights red→charging
The charging end signal sounds, and the incoming indicator
goes out→charging finished
Charging the Battery
The battery pack that comes with the phone is not fully charged when
purchased. Be sure to charge the battery pack before using the W62K
for the first time and whenever the battery level has become depleted.
※The common AC adaptor 02 (option) is usable for up to 240V AC.