115
Remote A
uto Loc
k
◎
Remote Auto Lock cannot be activated while your W51H is turned off or
outside of the service area.
◎
When you purchase the W51H, its initial value in “Erase Data” setting is
“Not Erase,” and its initial value in “Rel Phone Lock” setting is “Valid.”
■
Setting Auto Lock and FeliCa Lock on
Make a call to your W51H from the registered phone
number within the period of time which has been specified
in “Configuring Remote Auto Lock Settings” (page 114).
After repeating a call (3 to 10 calls you have specified), Remote Auto Lock
turns active, and you hear an announcement letting you know Auto Lock and
FeliCa Lock has been set.
After Remote Auto Lock turns active, your W51H is automatically turned off,
and turned on again.
Press
1
(ON/OFF Setup),
and then press
1
(ON).
Press
2
(Specified
Time), input the period
you want to specify, and
then press
c
(OK).
You can set the time period (the time
intervals from the first call to the last call
you should make to activate Remote Auto
Lock).
You can set the time period between 1 to 10 minutes.
Press
3
(Num of Incoming),
input the number of calls you
want to specify, and then
press
c
(OK).
You can set how many times you
should repeat making a call to activate
Remote Auto Lock.
You can set it from 3 to 10 calls.
