9
Getting Ready
1
3
2
Contacts
PULL tab
Lock slider
When removing the battery pack, always pull up on
the PULL tab. Doing otherwise may result in damage
to the contacts.
When removing the battery pack, turn the cell phone
power off.
Before attaching the battery pack, make sure that the
au IC-Card and microSD memory card are inserted.
When attaching the battery pack, make sure that the
battery pack cover is closed properly so that it does
not open so as to maintain water resistance.
Failure to follow the correct procedure when removing
or attaching the battery pack may result in damage to
the battery pack or the battery pack cover.
•
•
•
•
•
Replacing the Battery Pack
Removing the Battery Pack
Move the lock slider in the direction of the
arrow.
Remove the battery pack cover by lifting it up.
Remove the battery pack by pulling up on the
PULL tab.
Attaching the Battery Pack
With the PULL tab of the battery pack facing
up, align the contacts on the battery pack with
those of the cell phone and then insert the
battery pack securely.
Insert the tab of the battery pack cover into the
groove of the cell phone, and then close the
battery pack cover properly.
Move the lock slider to the “LOCK” position in
the direction of the arrow.
■
➡
➡
➡
■
➡
➡
➡
1
Lock slider
3
2
Battery pack
PULL tab
1
Lock slider
3
2
Battery pack
PULL tab