68
TV (1Seg)
Initial Setup of au Media Tuner
To watch TV (1Seg) using the au Media Tuner, you need to
configure initial settings.
When the standby screen is displayed, press
T
.
Disclaimer notes are displayed.
➡
Use
j
to check the disclaimer notes, use
j
to select
OK
, and then press
c
(
選択
[Select]).
The initial setting screen for using the au Media Tuner is
displayed.
•
Follow the on-screen instructions to configure each
setting. Then, the screen for setting TV (1Seg)
channels appears.
➡
Use
j
to select
オート設定(放送波)
(Auto
(Broadcasting wave)) and then press
c
(
選択
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
•
Select
マニュアル設定
(Manual) to set the channel
manually.
Watching TV (1Seg)
When the standby screen is displayed,
press
T
.
■
To Change Channels
Use
s
to change channels.
•
Before using this feature, you must configure au Media
Tuner initial settings (see the procedure on the left).
•
Channels cannot be changed with
s
when the data
operation screen is displayed.
1ch
2ch
…
12ch
TV (1Seg)
Change channels one by one.