FRAMELESS GLASS WALL UNIT
#16522
PAGE 7 OF 10
www.kc-store-fixtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
Next, Place an "L" bracket (B) on the inside of each glass side panel using holes on top glass and side
glass, closest to the sliding doors. Insert 1/2" bolt (
I
) through washer (H) then through pre-drilled hole
from the outside of the glass.
Repeat the above step for the other side panel to secure top glass in place.
STEP 6
Attach top to sides and front.
Attach "M" bracket (A) to each corner
at the back of the tower. Insert 1/2" bolt
(
I
) through washer (H) then through
pre-drilled holes on each side from the
outside of the glass.
B
A
B
A
H
N
H
STEP 5
Install upper door track to top glass panel prior to attaching top panel to wall unit.
Align holes in the upper track (L) with pre-drilled holes in the top glass. Insert 1/2" bolt (
I
) through washer (H) then through
pre-drilled hole from the outside of the glass. Once bolt is through glass and metal track, add nut (G) to end of bolt. Do not
fully tighten nut until both ends of track are attached to glass.
L
H
G
I
I
I
