KBT X6, Инструкция по эксплуатации, Страница: 5 / 8

Regular Maintenance
Clean Dust Box
1. Gently lift the finger position of dust box
cover;
2. The dust box cover will open, hold the
hand buckle position of the dust box by
hand, and gently force it apart upwards;
3. Open the box cover;
4. Take out the filter screen;
5. Turn over the dust box and pour out the
garbage.
Warm Tips:
Dust box can be washed with clear water.
Side Brush Cleaning
1. Turn over the machine directly upwards,
and pull up the side brush more forcefully;
2. Remove and clean the side brush;
3. Put the side brush back into the machine
after cleaning.
Warm Tips:
It is recommended to change the side
brush every 3-6 months to ensure the
cleaning effect.
Boundary Sensor
Wipe the sensor with a soft clean cloth to
ensure the sensitivity of the sensor.
Battery Maintenance
The host has a built-in high-performance
lithium ion rechargeable battery pack. In
order to maintain the battery performance,
please keep the host charged for daily use.
Warm Tips:
1.If you don’t use it for a long time, please
turn it off and store it, and charge it for _
times at least three months to avoid
battery damage due to over-discharge;
2. In case of battery leakage, remove the
battery and clean it up;
3. The capacity of deeply discharged or
long-term unused batteries may be
reduced, and it’s recommended to
be activated.
Universal Wheel Cleaning
1.Take out that universal wheel, and clean the
hair wound around the universal wheel;
2.Put the universal wheel back to its original
position,and press it down hard with your
fingers.
Warm Tips:
It is recommended to clean up every month.
Dustbin
Boundary Sensor
Universal wheel
1.The primary & HEPA filters may be cleaned
with the electric blower or brush.
2.After cleaning the dust on the primary &
HEPA filters, install the primary & HEPA filters
into the dust box again.
3.Put the dust box back into the equipment.
Clean the Primary & HEPA Filters
Primary filter
Tips:
If the dust box is not installed or it is not
installed in place, the garbage cannot enter the
dust box.
HEPA filter