KBL Tower pureEnergy Скачать руководство пользователя

Страница: 29 / 62

O p e r a t i n g I n s t r u c t i o n s

KBL Tower pureEnergy

DISPLAY 3

megaVoice: on/off

Back to previous/forward to next display

ADJUSTING THE BODY FAN

20-99 %, off (“off” only with central

exhaust- air module and only within the

initial 7 operating minutes)

As the body fan is also used for cooling down the

tanning unit, it is not always possible to decrease the

power down to 20 %. The minimum possible power

level depends on the temperature of the unit.

• To decrease the fan power, press the minus button.

• To increase the fan power, press the plus button.

• To turn off the fan, reduce the power to 20 %, then

press the minus button again and keep it pressed

for 0.5 seconds. The fan is turned off after a delay.

ADJUSTING THE VOLUME (OPTIONAL FEATURE)

This section is only applicable to units with an audio

option.

0-99 %

While the volume is being adjusted, the

value is displayed to the right of the

STOP button.

The initial value is set via AUDIO/VOL.HOT and

VOL.COOL in the service menu.

• To decrease the volume, press the minus button.

• To increase the volume, press the plus button.

• To turn off the sound, use the minus button to set

the value to 0.

SELECTING THE AUDIO SOURCE AND TRACK

(OPTIONAL FEATURE)

This section is only applicable to units with an audio

option.

SELECTING AN AUDIO SOURCE

The audio source (

Wellness

Pop

Studio Music

) is

selected via “P” (= program) in display 2. However, a

selection is possible only on the condition that at least

two sources are available and have been confi gured in

the service menu.

After the start of the tanning program, the audio

source defi ned as the default one in the service menu

Содержание Tower pureEnergy































































Результаты поиска

Содержание Tower pureEnergy

Отзывы:

Похожие инструкции для Tower pureEnergy

Бренды по названию

Популярные бренды

KBL Tower pureEnergy, Руководство по эксплуатации

Результаты поиска

Содержание Tower pureEnergy

Отзывы:

Похожие инструкции для Tower pureEnergy

Бренды по названию

Популярные бренды