background image

ORIGINAL ASSEMBLY INSTRUCTIONS

Version: MA_pureEnergy50_T5213_US_H
Date: December 2018
Item no.: 0100036633
Tanning device name [tech.]: T5213

Copyright and Trademark

© Copyright 2018

 

KBL GmbH

This documentation only covers products manufactured by KBL GmbH. It must not be duplicated, photocopied, 
translated or stored without prior special consent by KBL GmbH. Duplication on electronic media or in a machine 
readable form, either in whole or in part, is also prohibited.

  is a registered trademark of KBL GmbH.

DISCLAIMER
All information given in this document correspond to the status quo at the date of publication but may be subject 
to changes. Therefore, we do not accept any liability for, nor do we guarantee the accuracy and/or completeness 
of the information.

EXPORT
Technical equipment and versions of the devices are in accordance with the legal prescriptions of the respective 
country of destination. Export to the European Union of the KBL products, listed in this guide, or operation of 
the systems in these countries, are not permitted. KBL does not accept any manufacturers liability in case this 
direction is not adhered to. It is expressly pointed out that any violation of the export/operation prohibition will 
involve substantial risks of liability for the exporter and/or operator.

MANUFACTURER
KBL GmbH  
Ringstraße 24-26 · 56307 Dernbach · Germany 

DISTRIBUTED BY (CONTACT)
Specified in operating instructions

Содержание megaSun pureEnergy 5.0













































Отзывы:

Похожие инструкции для megaSun pureEnergy 5.0