
O p e r a t i n g I n s t r u c t i o n s
|
megaSun P9
PRODUCT LINE
23
Variable section of the
interior control panel
Basic functions
During the tanning session, you need quick access to basic functions
such as volume control, body fan and facial tanners.
You should also be in a position to change the subordinate functions.
The interior control panel caters for both requirements. You have
• direct access to frequently needed functions via the “Basic functions”
section, and
• access to the subordinate functions you made via the variable section of
the interior control panel (display according to the rotation principle).
Basic functions
Body fan
The body fan is automati-
cally controlled by ACS. As
soon as you press one of
the fan buttons, the auto-
matic mode is interrupted.
Keep pressed
for 2 seconds
max/on
min/off
Remark on facial tanner operation:
Third switching stage is optionally,
depending on device type & and
device setup configuration. For
safety reasons, the facial tanner,
once switched off, cannot be
switched on again before three
minutes have elapsed. If you try to
activate the facial tanner during this
time, your command will be stored,
and the tanner will be switched on
automatically after a delay, i.e. after
the blocking time has elapsed.
Volume
Facial tanner
Keep pressed
for 2 seconds
III
II
I
Содержание megaSun P9
Страница 1: ...OPERATING INSTRUCTIONS PRODUCT LINE ...
Страница 2: ......
Страница 46: ...O p e r a t i n g I n s t r u c t i o n s megaSun P9 PRODUCT LINE 46 Remarks ...
Страница 47: ......