KBL megaSun 7900 Alpha, Руководство пользователя

Страница: 54 / 60

INFORMATION MESSAGES
No. Info. message Description Remedy
203
Fill level aquaCool canister low
The content of the aquaCool canister is sufficient
for another 2.5 hours of operation with a spraying
time of 6 seconds each.
Replace the empty aquaCool canister with a full one. Do not
replace aquaCool with any other liquid.
204 Connection aquaCool unit faulty
Communication between control and module /
display has been interrupted.
Check / replace the patch cable. Acknowledge the
message by pressing START. If the fault persists, contact your
Customer Service.
205 Connection audio module faulty
206 Connection inside display faulty
207
aquaCool canister empty aquaCool canister empty.
Replace the aquaCool canister with a full one.
See chapter: Refilling Aroma and aquacool
208
Aroma supply low, please renew System has run out of scent.
Replace the Aroma tin.
See chapter: Refilling Aroma and aquacool
209 aircon:condensed-water
canister full, please empty
Condensate canister of air-conditioning unit full.
Empty the condensate canister of the air-conditioning unit,
acknowledge the message by pressing START.
210
Low battery charge, please renew
Button cell (CR-2032) of the control board
discharged.
Replace the button cell (CR-2032).
211 Connection preselect
display faulty
Communication between control and
“preSelection” display has been interrupted.
Check / replace the patch cable. Acknowledge the
message by pressing START. If the fault persists, contact your
Customer Service.
212 Connection RGB-module faulty
213
SD card missing No SD card in the audio module.
Insert an original SD card.
See chapter: Recording to an SD card/Removing the SD card
214
SD card unreadable SD card defective, incompatible content.
Insert a new original SD card. Acknowledge the
message by pressing START. See chapter: Recording to an SD
card/Removing the SD card. If the fault persists, contact your
Customer Service.
215
Connection to easy
Care terminal faulty
Communication between control and easyCare
terminal has been interrupted.
Check cable connections and power supply. Acknowledge the
message by pressing START. If the fault persists, contact your
Customer Service.
216
Voltage varies, blease check Power supply to the mainboard varies Check power supply to the mainboard.
217 No voice files on the SD card,
pleas check.
No voice files on the SD card found.
Rebuild voice folder on the SD card. If necessary replace origi-
nal SD card.
226 Quicktest Sensortoleranz
OK
Sensor Quicktest log entry - No display appears
- Message will be stored directly in the event log
(service menu).
227 Quicktest Sensortolerance
error
И н с т р у к ц и я п о э к с п л у а т а ц и и | megaSun 7900
α
lpha
54