KBL megaSun 7900 Alpha, Руководство пользователя

Страница: 36 / 60

Submenu call with START/ENTER. Displays the
current firmware version of the system components.
Do not operate the system with different
firmware versions!
•
All system components must be equipped
with an identical firmware version.
SERVICE 04/10
FIRMWARE-VERSIONS
> press enter
Submenu call with START/ENTER. Displays the
first and the last Software-Upload.
SERVICE 05/10
SOFTWARE UPLOAD
> press enter
Only for devices with LED technology.
Colour adjustment of the LED decorative lighting.
Factory setting : 2
>
> 1
> 2
SERVICE 06/10
RGB-Setup
SERVICE 07/10
SERVICE MODE
> press ENTER
Submenu SERVICE MODE.
Invoked by pressing
START (ENTER).
SUBMENU
SERVICE MODE
Service mode without tanning
Service mode with tanning
Troubleshooting mode.
The service mode is switched on for 30 minutes.
The mains voltage is connected. Error notifications
are ignored, but tanning cannot be started.
SERVICE 01/02
Service mode without tanning
> Start: press `ENTER` for 2s
Troubleshooting mode.
The service mode is switched on for 10 minutes.
The mains voltage is connected. Error notifications
are ignored, tanning can be started. After this peri-
od, there is a 3 minute restart lockout.
SERVICE 02/02
Service mode with tanning
> Start: press `ENTER` for 2s
Show the characteristics of the device:
- Configuration code
- Variant code
- Serial number
SERVICE 08/10
SOLARIUM IDENTIFICATION
> press enter
Branches to further configuration options.
These settings must only be made by
trained service personnel!
SERVICE 09/10
SOLARIUM X-CODE
>
> PIN:
И н с т р у к ц и я п о э к с п л у а т а ц и и | megaSun 7900
α
lpha
36