KBL MegaSun 4800, Руководство по эксплуатации

Страница: 44 / 60

TUBE REPLACEMENT CANOPY PART
Page
41
Tilt the canopy pane down.
⇒
Remove the tubes.
P2 Tubes
If your tanning unit is equipped with P2
tubes, maintenance and care intervals are equal to
the cycles for standard tubes.
Danger of destruction!
When installing / dismantling the P2 tubes, pay
attention to the middle holding clamp.
Facial tanners
4
↵
Refl ector
High-pressure lamp
Lamp holder
REPLACING THE HIGH-PRESSURE LAMP
Attention!
The high-pressure lamps must only be installed
and removed by trained technical personnel.
Dirt accumulation and bad seating can
lead to damage during the operation.
•
Insert the high-pressure lamps straight into
their holders.
•
When installed, the little glass pin in the mid-
dle of the light bulb must point towards the
refl ector.
•
Never touch the lamp or the refl ector with
your bare hands. If necessary, remove
grease and dirt with an alcohol-containing
agent.
⑰
⑯
Page
41
Tilt the canopy pane down.
Page
42
Remove the fi lter panes.
⑯
Hold one end of the high-pressure lamp.
Use
a clean cloth free from grease.
⑰
Press the lamp against one side of the holder.
As soon as the relieved side is loose, take the
lamp out of the holder.
Perfect
Ta
n
+
V
it
a
m
in
D
O p e r a t i n g I n s t r u c t i o n s | megaSun 4800
44