background image

14

Operation and Service KBL 4000/4500

3.3.   Filter panes 

The facial tanners are equipped with an additional safety func-
tion. Behind each of the fi lter panes, there is a safety cutout 
switch that will switch off the burner in the case of a missing or 
broken pane.

Never operate the tanning system with a defective # lter pane. 

Carry out visual inspections regularly"

Filter panes may only be replaced by ones of the same type"

The # lter panes may be dismantled and replaced by trained ex-

pert staff only.

After having dismantled the frame carrying the fi lter pane (see 
below), clean the fi lter pane with a household glass cleaning 
agent and a soft cloth or chamois leather.

Filter pane in the frame

Safety function

Filter panes

Figure 3-5 Cover of the fi lter frame

Figure 3-6 Remove the fi lter frame

1

2

3

Step

Procedure

Reference

1

Dismantle the acrylic pane of the canopy.

see 3.2

2

Undo the screw fi xing the fi lter pane frame (1), swing the 
frame downwards (2) and pull out the frame including the 
fi lter pane (3). 

Fig. 3-5
Fig. 3-6

3

After cleaning, mount the fi lter pane again by following the 
reverse order.

Содержание megaSun 4000 Super Power

















































Отзывы:

Похожие инструкции для megaSun 4000 Super Power