KBL 7900a, Инструкции по сборке и настройки меню

Страница: 5 / 68

A s s e m b l y I n s t r u c t i o n s | 6700
α
/6800
α
/7000
α/
7900
α
5
1. General information
1.1 About these instructions
This manual is intended for use by
• studio operator.
• qualified, trained and authorized service techni-
cians.
Any person handling, mounting or servicing this tan-
ning device must have read and understood these
instruction.
Keep this manual ready to hand at all times.
1.2 Safety signs
This symbol indicates that general haz-
ards exist for the human health.
This symbol indicates that due to elec-
trical tensions hazards exist to the
human health.
This symbol indicates that due to fall-
ing loads hazards exist to the human
health.
This symbol indicates the danger of
pinching.
When assembling heavy components,
you can pinch your fingers or hands.
This symbol indicates the danger of
burns from hot lamps and housing
parts. If the tanning device was oper-
ated before being opened, lamps and
housing parts may be hot.
This symbol indicates that damages
may occur at the tanning device, at the
material or at the environment.
Danger due to leakages.
The tanning device can be damaged by
leaking connections.
• Slide the plastic tube
up to the stop
into the
quick connector socket.
1.2.1 IMPORTANT INFORMATION
This symbol does not identify safety
notices, but states information for a bet-
ter understanding.
1.3 Signal words
DANGER
• Death or serious injury is imminent.
WARNING
• Death or serious injury is possible.
CAUTION
• Moderate or minor injury is possible.