INFORMATION MESSAGES
No.
Info. message
Description
Remedy
203
Fill level aquaCool
canister low
The content of the aquaCool canister is
sufficient for another 2.5 hours of operation
with a spraying time of 6 seconds each.
Replace the empty aquaCool canister with a full one.
Do not replace aquaCool with any other liquid.
204
Connection aquaCool
unit faulty
Communication between control and
module / display has been interrupted.
Check / replace the patch cable. Acknowledge the
message by pressing START. If the fault persists,
contact your Customer Service.
205
Connection audio
module faulty
206
Connection inside
display faulty
207
aquaCool canister empty
aquaCool canister empty.
Replace the aquaCool canister with a full one.
See chapter: Refilling Aroma and aquacool
208
Aroma supply low,
please renew
System has run out of scent.
Replace the Aroma tin.
See chapter: Refilling Aroma and aquacool
209
aircon:condensed-water
canister full, please empty
Condensate canister of air-conditioning
unit full.
Empty the condensate canister of the air-conditioning
unit, acknowledge the message by pressing START.
210
Low battery charge,
please renew
Button cell (CR-2032) of the control board
discharged.
Replace the button cell (CR-2032).
211
Connection preselect
display faulty
Communication between control
and “preSelection” display has been
interrupted.
Check / replace the patch cable. Acknowledge the
message by pressing START. If the fault persists,
contact your Customer Service.
212
Connection RGB-
module faulty
213
SD card missing
No SD card in the audio module.
Insert an original SD card.
See chapter: Recording to an SD card/Removing the
SD card
214
SD card unreadable
SD card defective, incompatible content.
Insert a new original SD card. Acknowledge the
message by pressing START. See chapter: Recording
to an SD card/Removing the SD card. If the fault
persists, contact your Customer Service.
215
Connection to easy
Care terminal faulty
Communication between control and ea-
syCare terminal has been interrupted.
Check cable connections and power supply. Ack-
nowledge the message by pressing START. If the fault
persists, contact your Customer Service.
216
Voltage varies, blease check
Power supply to the mainboard varies
Check power supply to the mainboard.
217
No voice files on the SD
card, pleas check.
No voice files on the SD card found.
Rebuild voice folder on the SD card. If necessary re-
place original SD card.
226
Quicktest Sensortoleranz
OK
Sensor Quicktest log entry - No display
appears - Message will be stored directly
in the event log (service menu).
227
Quicktest Sensortolerance
error
M a n u a l e o p e r a t i v o
|
megaSun 6700 - 6800 - 6900
55
Содержание 6700 alpha
Страница 1: ...MANUALE OPERATIVO ...