KBDCRAFT Kit Adam, Инструкция по эксплуатации

Страница: 2 / 16

②
Lubricate the 05001 Stabi with the grace
provided, especially the contact area of the wires.
Be careful with the stems when you reassemble
them.
*The 05002 JWK Stabi is pre-lubed. Therefore no
lube is offered.
③ Put the Stabis on the Plate. Align the wire towards
the notch. Push the wire in first. Then push the back
end down. Make sure the snaps are engaged.
Stabi
①
Check the stabilizers. Make sure they're well put
together.
Stabi
x4
| | | |
|
|
|
④
Align the Plate, Poron piece, and PCB as making a
sandwich. Finish the Core by installing the switches.