background image

 

Wireless Ethernet PtP & MP System Operations Manual 

 

PREFACE 

 

KBC WES PART NUMBERS  

This operations manual covers the following part numbers: 

 

DESCRIPTION 

 

 

 

 

 

         KBC PART NUMBER 

Point-to-point, 7.8 dBi gain directional SP Host and Client outdoor kit:           WES-2500 
Point-to-point, 16.7 dBi high gain directional SP Host and Client outdoor kit:    WES-2-4 
Point-to-Multipoint, 7.8 dBi directional Host Access Point outdoor kit:                  WAP 
Point-to-Multipoint, 2.5 dBi Omni-directional Host Access Point kit

¹

:        

WAPOM 

Point-to-Multipoint, 7.8 dBi gain directional Subscriber Unit outdoor kit:                 WSU 
Point-to-Multipoint, 16.7 dBi gain directional Subscriber Unit outdoor kit:             WSUP 
Point-to-Multipoint, 24 dBi Parabolic Dish Subscriber Unit outdoor kit:                WSUDI 
Point-to-Multipoint, 2.5 dBi Omni-directional Subscriber Unit kit

¹

:                    WSUOM 

Replacement Single-point Host, 7.8 dBi gain directional unit (module only): 

    WEM 

Replacement Single-point Host, 16.7 dBi gain 6” x 6” patch (module only): 

  WEMP 

 

¹Not weatherproof, must be enclosed in an SWE-O housing if used outdoors 

 

Accessories: 

 

24 dBi parabolic dish antenna (add to WSU or WEM part number only)

 ²

:                18D 

Outdoor enclosure used with WAPOM or WSUOM: 

 

 

 

 SWE-O 

Outdoor enclosure used with WAP, WSU or WEM part numbers: 

 

    SWE 

Pole/wall mounting kit for standard 2” pole, with swivel mount for alignment

³

:   LNBMB 

Mid-span compliant power injector module

   

 

    

 

     PIM 

500 mA 12 VDC non-regulated power supply

 

 

                      PS-500-A 

 

²One included in WSUDI kit 
³One per WES module included in all directional WES series kits 

⁴ 

One per WES module included in all WES series kits 

 

PRODUCTS INCLUDED IN KITS 

All Point-to-point WES kits include the following: 
Qty 2:  WES Modules 

(WES-2500)

 or WES patch units 

(WES-2-4)

 

Qty 2:  PIM 
Qty 2:  PS-500-A 
Qty 2:  LNBMB 
Qty 2:  Strain Relief for Ethernet cable connection at RJ-45 LAN port of WES module 
Qty 1:  Operations manual 
 
All Multipoint WES kits include the following: 
Qty 1:  MP Host module 

(WAP, WAPOM)

 or subscriber unit 

(WSU, WSUP, WSUDI, WSUOM)

 

Qty 1:  PIM 
Qty 1:  PS-500-A 
Qty 1:  LNBMB (excluded in WAPOM or WSUOM) 
Qty 1:  Strain Relief for Ethernet cable connection at RJ-45 LAN port of WES module 

Qty 1:  Operations manual 

 

 

 

 

 
 
P-1 

 

Wireless Ethernet PtP & MP System Operations Manual 

 

PREFACE (CONTINUED) 

 

TECHNICAL SUPPORT AVAILABILITY 

This manual is comprehensive to the extent that it will answer many of  your technical 
questions.  Our  toll  free  technical  assistance  is  available  should  you  require  additional 
assistance. KBC offers technical support over the phone or by way of e-mail to all KBC 
integrators, dealers and end users of the WES products. Our technical support hotline is 
available  during  regular  US  west  coast  business  hours,  Monday  through  Friday  on  all 
non-major  holiday  business  days.  KBC  will  follow  up  on  all  electronic  inquiries  before 
the end of the following business day.  
 
NORTH AMERICA  
888-366-4276: Monday – Friday 10am-8pm Eastern (7am-5pm Pacific) 

[email protected]

: 24hr availability, response time varies 

 
HAWAII & ALASKA / GUAM, PR & OTHER US TERRITORIES 
949-297-4930: Monday – Friday 7am-5pm Pacific Time 

[email protected]

: 24hr availability, response time varies 

Note: the toll free 888# does not work from Alaska 
 
CENTRAL / SOUTH AMERICA 

[email protected]

: 24hr availability, response time varies 

 
ASIA 

[email protected]

: 24hr availability, response time varies 

 
SOUTH PACIFIC / PACIFIC ISLANDS 

[email protected]

: 24hr availability, response time varies 

 
EUROPE 
+44(0)1622 418782: Monday – Friday 9am-5pm UK Time 

[email protected]

: 24hr availability, response time varies 

Note: this product is not CE approved for use in Europe 
 
AFRICA 

[email protected]

: 24hr availability, response time varies 

 
Technical Support is offered in English, however, KBC has worldwide representatives 
who can provide technical support in many local languages. 
 
 
Please note: technical assistance is available after having read through this manual. 
Comprehension of terms and topics will assist in trouble-shoot procedures. 
 
 

 

 

 

 

 

 
 
P-2 

Содержание WAP



















Отзывы: