KBC FTL1-S2-MSC, Руководство пользователя

Страница: 3 / 9

Manual-FTL1-Rev1009.pdf
Page 3 of
9
www.kbcnetworks.com
Copyright © KBC Networks Ltd.
1. Overview
1.1 Introduction
The FTL1-S2-MSC Series 10/100M Auto-Sensing Ethernet Multi-mode Fiber Optic
Transceiver is designed using advanced fiber optic technology. This series transmit and
receive 10/100 Mbps (no adjustment is required) data over two single-mode optical fibers,
extending the Ethernet transmission distance from its normal few hundred meters to 25
kilometers. By using optical fiber as transmission media, this series continue to perform its
secured, high-speed and long-distance communication even under the adverse condition
such as lighting, power surge and electromagnetic interference; substantial saving on
lighting and power surge protection equipments if copper wires were used.
The FTL1-S2-MSC Series is fully assembled using SMT components for stability and
reliability.
1.2 Technical Specification
ETHERNET
Supporting standards IEEE802.3 10Base-T, 100Base-T
Data Rate 10/100Mbps auto-sensing, Full Duplex or Half
Duplex
Physical Interface RJ45, DCE interface
OPTICAL
Number of Fibers 2
Wavelength 1310nm
Fiber Type 9/125
μ
m(SM)
Distance 0~25km
Connector Type ST/PC