KBC ESML8P-PC2, Руководство пользователя

Страница: 102 / 110

Ethernet Switch User Manual
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 102 of 110 www.kbcnetworks.com
Port Mirroring Commands Set
Command Level Description Example
monitor
[RX|TX|Both]
I Configure source port of
monitor function
switch(config)# interface fastEthernet
2
switch(config-if)# monitor RX
monitor rx [Port ID] G Set RX destination port of
monitor function
switch(config)# monitor rx 2
monitor tx [Port ID] G Set TX destination port of
monitor function
switch(config)# monitor tx 3
show monitor P Show port monitor
information
switch# show monitor
show monitor I Show port monitor
information
switch(config)# interface fastEthernet
2
switch(config-if)# show monitor
no monitor I Disable source port of
monitor function
switch(config)# interface fastEthernet
2
switch(config-if)# no monitor
802.1x Commands Set
Command Level Description Example
8021x enable G Use the 802.1x global
configuration command to
enable 802.1x protocols.
Switch(config)# 8021x enable
8021x system radiusip
[IP address]
G Use the 802.1x system
radius IP global
configuration command to
change the radius server
IP.
Switch(config)# 8021x system
radiusip 192.168.1.1
8021x system serverport
[port ID]
G Use the 802.1x system
server port global
configuration command to
change the radius server
port
switch(config)# 8021x system
serverport 1812
8021x system accountport
[port ID]
G Use the 802.1x system
account port global
configuration command to
change the accounting
port
switch(config)# 8021x system
accountport 1813
8021x system sharedkey
[ID]
G Use the 802.1x system
share key global
Switch(config)# 8021x system
sharedkey 123456