Un-joining EE2CL units
1.
Disconnect the EE2CL unit from the old network.
2.
Connect a 48vdc PSU to the unit.
3.
Wait until the green BNC LED lights.
4.
Using the straightened paper-clip press the small push-button located behind and slightly above the RJ45
LED.
5.
Wait until the blue LED turns off.
6.
Release the paper-clip.
7.
The green BNC and RJ45 LEDs will flash and then turn off.
8.
The green BNC LED will then switch on for 10 seconds and then switch off.
9.
The units are now un-joined.
Need Help?
Visit our website
http://www.kbcnetworks.com
or contact your nearest KBC office or dealer:
USA
Phone:
+1 949 297 4930
Toll Free: +1 888 366 4276
Email:
EMEA
Phone:
+44(0)1622 618787
Email:
APAC
Phone:
+65 98463323
Email:
