Page 7 of 8
Installation Instructions
Please check the following items before installation. If any are missing, please
contact the dealer.
⚫
EoU 8 channel receiver --------- x1
⚫
Power cable --------------------- x1
⚫
QSG/User manual --------------- x1
Please follow the installation steps below:
1)
Screw the receiver into the rack.
2)
Use a standard Ethernet cable to connect the RJ45 port of the receiver to
your existing network.
3)
Use Ethernet cable to connect the UTP port(s) of the receiver and the
transmitter(s).
4)
Use a grounding wire to connect to the grounding terminal.
5)
Check that the installation is correct and power on the device to be sure
it is operating normally.
Troubleshooting
Please refer to the following information if the device does not work:
⚫
Confirm the installation is according to the factory installation
requirements.
⚫
Confirm the RJ45 cable order is following the EIA/TIA568A or 568B
industry standards.
⚫
The maximum transmission distance depends on the signal source and
cable quality. Please do not exceed the maximum transmission distance.
⚫
Try replacing each end with a known working unit to determine if you
have a damaged or faulty unit.
⚫
If the problem persists, please contact your nearest KBC office or dealer.
