16
Top Support Assembly
1.
Refer to your S
pacing Diagram
to measure the top support height. .
Align the ¼-20 x 5/8” bolt to the proper notch mark on the top support
sleeve.
2.
Fasten ¼”-20 x 5/8” bolt to the specified height.
TORQUE BETWEEN 80-90 IN-LB.
3.
Ensure pull clamp is loosened, and clamp position is sitting as seen
in the image below.
______________________________________________________________________________________
KB Racking Inc., 1050 King St. W., Toronto, ON, M6K 0C7 | 1 (888) 661-3204 | [email protected] | www.kbracking.com
Top support connector
Top support sleeve
Pull clamp
¼”-20 x 1.75”
¼”-20 x 5/8”
Clamp position
Notch Marks
Ballast tray stud
Windshield stud
Windshield hook
