14
Installing Splices
Splices are used to fasten two rails together. One splice is used per two
rails.
1.
Place splice studs through rail holes. Splice stud will be situated
between rail walls as seen in the image below.
2.
Place ¼” x 7/8" washer on top of each splice.
3.
Fasten both ¼”-20 hex nuts to splice studs.
TORQUE BETWEEN 80-90 IN-LB.
______________________________________________________________________________________
KB Racking Inc., 1050 King St. W., Toronto, ON, M6K 0C7 | 1 (888) 661-3204 | [email protected] | www.kbracking.com
¼”-20 x 7/8” washer
Splice
Splice Stud
¼”-20 hex nut
Studs fitted through rail wall
¼”-20 hex nuts fastened
to splice studs
