3
FEATURES
SUS 304 stainless steel tank
Industrial grade integrated circuit
0~80℃ temperature range
1~99 minutes working time
Power adjustable
Dewaxing and degreasing function
40KHz for intensive rinse
Auto Stand-by, Sleep, and wake up by one key-press Mode
Simple Digital Controller of high-precision and a long service-life
Digital controller of high-precision and a long service-life
OPERATION Instructions
1. Fill the stainless steel tank with cleaning solution; turn the single phase switch or three
phases switch on; After power-on, the LED display of the temperature displays the actual
environmental temperature; while the LED display of time displays 3 minutes (default
ultrasonic time).
2.
Time setting:
Press the “
TIME-/TIME+
”shortly at a time means time increase/reduce
1min at a time, press and hold means time will increase/reduce by 10mins continuously. The
cleaning stops when the timer counts down to 00:00. If the unit needs to be stopped before the
timer runs up, press “Ultrasonic” button.
3.
Temperature setting:
Press
“
temperature-
/temp”
shortly at a time means
time increase/reduce 1℃ at a time, press and hold there means time
will
increase/decrease by 10℃ .
Note: Usually, the best cleaning temperature is within 40℃ to 60℃. The temperature
displayed is the real temperature. The default value of the temperature is 0℃. When you set
temperature, the heating function can not be started unless the set temperature is higher
than the environmental temperature and the “
Heating
” button is pressed after the
temperature setting. When the real temperature is higher than the set temperature, the
indicator of heating will turn off. However, the heating function would not be turned off
automatically if the ultrasonic cleaning still works, it will start again when the water
temperature is lower than the set temperature. In this case, you can only press “
Heating
” to
turn off heating function. However, if the ultrasonic cleaning time runs out, the heating
function will stop automatically.
4.
After time and temperature setting, press “
Ultrasonic
” or ”
Heating
” button to start both
functions. Press “
Ultrasonic
” or ”
Heating
” button again, the U
ltrasonic or heating function
will stop.
