8
BEFORE RIDING:
Your new bicycle was assembled and tuned in the factory and then partially disassembled for shipping.
The following instructions will enable you to prepare your bicycle for years of enjoyable cycling. For
more details on inspection, lubrication, maintenance and adjustment of any area please refer to the
relevant sections in this manual. If you have questions about your ability to properly assemble this
bicycle, please consult a professional bicycle mechanic before riding.
5/6mm hex wrench
Torque wrench
Air pump & tire gauge to inflate tires
Bicycle lubricant or grease
6” adjustable wrench
Phillips & standard screwdrivers
A pair of pliers with cable cutting ability
BEFORE EVERY RIDE:
Just a minute spent before each ride can significantly improve your safety and the enjoyment of your
ride. So, each time before you ride make a habit of performing the following safety checks.
• Stand in front of the bicycle facing rearward and hold the front wheel securely between your legs. Try
to twist the handlebar and verify that it does not move. Then pull the handlebars up, trying to lift the
bike. There should be no movement.
• Try to push the front wheel from side to side and confirm that it feels tight and will not wobble. Lift
the front wheel up by the handlebars and strike it downward with the heel of your hand and confirm
that it is tight. Spin the front wheel and confirm that it does not wobble or contact the fork or brake
pads.
• Try to lift, push down on and twist the seat to confirm that it is tight.
• Make sure all reflectors are in position and not broken.
• Now, put on your bicycle safety helmet and enjoy your ride. Your safety is well worth it. Also, be sure
to read and follow the warnings and instructions in the Assembly, Maintenance and other sections of
this manual.