KaZAM blinki, Руководство пользователя, Страница: 16 / 19

16
Tires
Maintenance:

Check the tire inflation pressure frequently as all tires lose air slowly
over time. Keep weight of bicycle off the tires for extended storage.

Do not use compressed air filler points at petrol stations to inflate the
inner tubes. This can cause the bicycle tires to overinflate and burst.

Replace worn tires.
WARNING: Riding or sitting on the bicycle if a tire is under inflated
can damage the tire and the inner tube.
Inflating the Tires:

Inflate the tires using a hand or foot pump.

The maximum inflation pressure can be found on the tire sidewall.

If two inflation pressures are on the tire sidewall, use the higher
pressure for on riding on road, and the lower pressure for riding
off‐road.
Make sure the edge of the tire (the bead) is the same distance from the
rim, all around the rim, on both sides of the tire before adding any air to
the tire. If the tire does not appear to be correctly seated, release air from
the inner tube until the bead can be pushed back into the rim where
necessary. Slowly add air and frequently stop to check the seating and the
pressure of the tire, until you reach the correct inflation pressure.
Tire Bead NOT Seated Correctly
Tire Bead Seated Correctly
Fig 09