KaZAM blinki, Руководство пользователя, Страница: 15 / 19

15
Repair and Service
WARNING :

Failure to inspect the bicycle frequently, and to make repairs or
adjustments as necessary can result in injury to the rider or to others.
Make sure all parts are adjusted and assembled correctly as written in
this manual and any “Special Instructions” if included.

Replace any damaged, badly worn or missing parts immediately.

Make sure all fasteners are tightened correctly as written in this
manual and any “Special Instructions”. Parts that are under tightened
can operate poorly or be lost. Over tightened fasteners can cause
damage to parts. Ensure any replacement fasteners are the correct
size and type before installation.
NOTE: Have a bicycle service shop make any repairs or adjustments if you
do not have the required tools or if the instructions in this manual or any
“Special Instructions” are not sufficient.
Inspection of Bearings
Maintenance
Check the bearing of this bicycle frequently. Lubricate the bearings once a
year or anytime they do not pass the following tests:
Head tube Bearings:
The fork should always turn freely and smoothly. You should not be able to
move the fork up, down, or side‐to‐side within the head tube with the front
wheel off the ground.
Wheel Bearings:
Lift each end of the bicycle off the ground and slowly spin the raised wheel
by hand. If the wheel passes the following two tests, the bearings are
correctly adjusted.

The wheel spins easily and freely.

There is no side‐to‐side movement at the rim of the wheel when you
push it to the side with a light force.