FAN OPERATION
On/Off
& Speed
Control
Oscillation
Button
Scent
Control
Dial
Scent
Cartridge
Compartment
On/Off
To turn fan on, turn the fan Speed Control Knob
located on the bottom of the control panel
clockwise.
Speed Control
Turn the fan Speed Control Knob clockwise to
set the Fan at High( ) or Low ( )
Oscillation
To activate the Oscillation feature, press the
Oscillation button ( ) once.
Press the Oscillation button again to turn the
Oscillation feature off.
Once a Febreze
®
Set&Refresh
®
scent cartridge has been inserted,
fresh Febreze
®
scent is released
into the Scent Path and travels to
the interior region of the fan.
At this point, the fresh Febreze
®
scent combines with the air being
drawn into the fan by the fan motor.
The fan then pushes a stream of
Febreze
®
scented air out through
the front fan grilles to cool and
freshen your entire room.
The Scent Control Dial allows you to
control the level of scent output.
To operate the fan without scent,
simply remove the Febreze
®
Set&Refresh
®
scent cartridge.
HOW IT WORKS
Set&Refresh
®
Scent Cartridge
Scent Path
Air In
Air In
Freshened Air Out
Freshened Air Out
1. Remove the fan from the plastic bag and carton.
2. Place the fan on a dry level surface.
3. Plug the fan into a 120 volt outlet.
See the next two pages for instructions on installing the Febreze
®
Set&Refresh
®
scent cartridge.
