Owner’s manual
3
■
Small one-way cassette type
Air Filter
(Filters dust)
Air Intake
(Intake room air)
Grounding Screw
(In the control box)
Air Outlet Horizontal Louver
(Adjust the air-out directions. )
■
Wall-mounted type
Grounding Screw
(In the control box)
Air Filter
(Filters dust)
Air Intake
(Intake room air)
Lock Buckle
(Closes the air
intake grille)
Air Outlet
(Connects the duct)
■
Duct/ceiling type
Air Outlet
(Expels room air)
Air Intake
(Intakes room air)
Electric control box
Heat Exchanger
(Exchanges cool air into warm air
■
High static pressure duct type
One refrigerant system
Air Filter (Filters dust)
(In the air intake opening)
Grounding Screw
(In the control box)
Air Intake
(Intakes air)
Air Out, Air Out Louver
(Adjust the air-out direction)
Fig.2-4
Fig.2-7
Fig.2-8
Fig.2-9
Air return grille: Induced air, decoration
Dust filter: Filter the dust in the induced air
Grille bolt-lock: Lock the air return grille
Air deflector: Control the blow out
direction of the air
Display panel: Display status information
and receive the remote controller signal
Fig.2-5
Fig.2-6
Wire cable inlet: Intake of the power and
communication wires
Electronic control box: The control
component of the air-conditioner
Air return port: Induced the indoor air
Water plug for maintenance: Water level
sensor for water drainage and checking
under maintenance
Air outlet: Blow out the cool and heat air flow
■
Small one-way cassette type
(Second generation 18-36 model)
