Kaysun ONNIX KAY-D 26 DR8, Руководство пользователя

Страница: 11 / 20

◄ Page 11 ►
A
A
Manual Operation (Without Remote)
In the event that your remote control fails to work,
your unit can be operated manually with the
MANUAL CONTROL button located on the indoor
unit. Note that manual operation is not a long-
term solution, and that operating the unit with
your remote control is strongly recommended.
BEFORE MANUAL OPERATION
Unit must be turned off before manual
operation.
To operate your unit manually:
1. Press the button on both side of the indoor unit
to loosen the panel, then lift the front panel up, use
the automatic telescopic rod to prop up the panel.
2. Locate the MANUAL CONTROL button
on the right-hand side of the unit. Press the
recessed button with your finger or the tip of a
ballpoint pen.
3. Press the MANUAL CONTROL button one
time to activate FORCED AUTO mode. Press the
MANUAL CONTROL again to activate FORCED
COOLING mode.
4. Press the MANUAL CONTROL again
to activate FORCED COOLING mode.
5. Press the MANUAL CONTROL
button a third time to turn the unit off.
6. Hold the panel by hand, and press the middle
position of the automatic telescopic rod to close
the front panel.
How to operate your unit without the
remote control
CAUTION
The manual button is intended for testing
purposes and emergency operation only.
Please do not use this function unless the
remote is lost and it is absolutely necessary.
To restore regular operation, use the remote
control to activate the unit.
Automatic
telescopic rod
(press the middle
position to release)
Press here to loosen
the front panel
Manual control button
Unit Specifications
and Features