background image

 WARNING for Using 

R-32

 Refrigerant

When flammable refrigerant are employed, appliance shall be stored in a well -ventilated area 

where the room size corresponds to the room area as specifiec for operation.

For 

R-32

 frigerant models:

Appliance shall be installed, operated and stored in a room with a floor area larger than 

X m² 

Appliance shall not be installed  in an unvertilated space, if that space is smaller than 

X m²

 

(Please see the following form)

.

Reusable mechanical connectors and flared joints are not allowed indoors.

(

EN

 Standard Requirements).

Mechanical connectors used indoors shall have a rate of not more than 3g/year at 25% of the 

maximum allowable pressure. When mechanical connectors are reused indoors, sealing parts 

shall be renewed. When flared joints are reused indoors, the flare part shall be re-fabricated. 

(

UL

 Standard Requirements)

When mechanical connectors are reused indoors, sealing parts shall be renewed. When flared 

joints are reused indoors, the flare part shall be re-fabricated. (

IEC

 Standard Requirements)

Mechanical connectors used indoors shall comply with ISO 14903.

Amount of refrigerant 

to be charged (kg)

Minimum room 

area (m²)

1.11

1

1.65

2

≤2.58

5

≤3.08

7

≤3.84

10

≤4.24

Model

(Btu/h)

12000

18000

24000
30000

36000

42000-48000

12

≤4.39

60000

13

Safety 

Precautions

Page 7 

European Disposal Guidelines

This appliance contains refrigerant and other potentially hazardous materials. When disposing of 

this appliance, the law requires special collection and treatment. 

Do not

 dispose of this product as 

household waste or unsorted municipal waste. 
When disposing of this appliance, you have the following options:

Dispose of the appliance at designated municipal electronic waste collection facility.

When buying a new appliance, the retailer will take back the old appliance free of charge.

The manufacturer will take back the old appliance free of charge.

Sell the appliance to certified

 

scrap metal dealers.

Special notice

Disposing of this appliance in the forest or other natural surroundings endangers your health and is bad 

for the environment. Hazardous substances may leak into the ground water and enter the food chain.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that waste electrical and eletrical 

equipment should not be mixed with general household waste.

Содержание KPDA-35 DVR14













































Отзывы: