Kaysun KEM-HT-75, Инструкция для владельца и по установке

Страница: 14 / 57

11
Symbol explanation
Drain vavle
Water pressure
instrument
Water flow switch Gate valve
Differential pressure by-
pass valve
Y-filter Thermometer Pump Check valve
Atmospheric exhaust
valve
Expansion
tank
Safety valve Soft joint
Solenoid three-
way valve
Fig.7-1 Connection drawing of pipeline system
• The ratio of the two - way valves on the terminal shall not exceed 50 percent.
• The main outlet water temperature sensing (Tw) head of the unit at address 0 needs to be placed on the main outlet
pipe.
• The hot water tank and the hot water exchange pump of the unit use the CN125 (220V) port control switch on the slave
board of the 0 # unit, pump output is controlled through CN108 (0-10V) .
• The electromic butterfly valve on the unit water outlet pipe is controlled by the CN123 port on the slave board of each
unit.
NOTE
8 OVERVIEW OF THE UNIT
8.1 Main parts of the uint
Table 8-1
NO. NAME NO. NAME
1 Air outlet 6 Condenser
2 Top cover 7 Water outlet
3 Electric control box 8 Air inlet
4 Compressor 9 Water intlet
5 Evaporator 10 wire controller (It can be placed indoors)
1
8
6
2
4
4
3
5
7
9
1
8
Fig. 8-1 Main parts of 65KW Fig. 8-2 Main parts of 110KW