Kaysun KCCHT-02, Руководство пользователя, Страница: 11 / 20

8
This time the hour of the clock will flash, it means the current setting is the hour of Timer 1 “Off”, press the “▲”
or “▼” to adjust, press “ ” key when finished, and then the minute of the clock will flash, it means the current
setting is the minute of Timing 1 “Off”, press the “▲” or “▼” to adjust, press “ ” key when finished, the LCD will
display as the following:
At this time the hour of the clock will flash, it means the current setting is the hour of the Timer 2 “On”, and the
follow setting method will be the same of the Timer 1. Similarly, the setting of Timing 3 is the same with this
method. After setting, press “OK” key or wait for 7 seconds then the setting to be effective, and the LCD will
display the effective timing information, as the following display:
Example of Timing setting:
Main page
Press “Setting” key twice to enter hour setting inter-
face of “Timer 1 On”
Through the “▲” or “▼” key, set the hour number
of “Timing 1 On” to be 07
Press “
u
” key to enter minute setting interface of
“Timer 1 On”, adjust the minute number to be 10
Press “
u
” key to enter hour setting interface of
“Timer 1 Off”, adjust the hour number of “Timer 1
Off” to be 12
Fig.4-6
Fig.4-7
Press “
u
” key to enter minute setting interface of
“Timer 1 Off”, adjust the minute number to be 30
Whether press “OK” key Whether press “OK” key
No
No
“Timer 1” setting
failed, after 7
seconds, the
page shift to
Successfully set the On time of
“Timer 1” to be 07:10 and Off time
of “Timer 1 Off ” to be 12:30, then
back to the main page.
Finish setting the On time of
“Timer 1” to be 07:10 and Off
time to be 12:30, then enter the
setting of “Timer 2”.
The setting steps of “Timer 2” and “Timer 3” are the same as “Timer 1”,
after setting all the settings then press “OK” key, and the3 timing periods
will be effective, and then back to the main page.
Yes Yes